Difference between revisions of "Upload bootloader"

From Flav's Wiki
Jump to: navigation, search
Line 3: Line 3:
 
References:
 
References:
 
* http://hardware-libre.fr/2014/02/fr-arduino-atmega-programmation-isp/
 
* http://hardware-libre.fr/2014/02/fr-arduino-atmega-programmation-isp/
 +
* https://www.arduino.cc/en/Tutorial/ArduinoISP
  
 
=Hardware Connexion=
 
=Hardware Connexion=
Line 28: Line 29:
 
|13 (SCK)
 
|13 (SCK)
 
|}
 
|}
 +
 +
=Programming with IDE=
 +
==Program the programmer==
 +
Steps:
 +
# Select the ArduinoISP Sketch: Select File>Examples>Arduino ISP
 +
# Select your programmer board (Arduino Uno): Tools>Board>Arduino Uno
 +
# Select the serial port: Tools>Serial Port>COMXXX
 +
# Upload

Revision as of 18:29, 11 July 2015

This page describes how to upload a bootloader on an Arduino Pro Mini with an Arduino Uno.

References:

Hardware Connexion

Arduino Uno (Programmer) Arduino Pro Mini
3.3V or 5V (depending on on Mini version) Vcc
GND GND
10 Reset
11 (MOSI) 11 (MOSI)
12 (MISO) 12 (MISO)
13 (SCK) 13 (SCK)

Programming with IDE

Program the programmer

Steps:

  1. Select the ArduinoISP Sketch: Select File>Examples>Arduino ISP
  2. Select your programmer board (Arduino Uno): Tools>Board>Arduino Uno
  3. Select the serial port: Tools>Serial Port>COMXXX
  4. Upload