Difference between revisions of "Arduino Bus Pirate"

From Flav's Wiki
Jump to: navigation, search
(Created page with "=Why= I've broken my FTDI USB/TTL and need to upload a new sketch without unmounting all my prototype. =Ressources= * http://dangerousprototypes.com/docs/Bus_Pirate_I/O_Pin_D...")
 
Line 1: Line 1:
 
=Why=
 
=Why=
I've broken my FTDI USB/TTL and need to upload a new sketch without unmounting all my prototype.
+
I've broken my FTDI USB/TTL and need to upload a new sketch without unmounting all my prototype (SPI pins on my prototye are used). I have a Bus Pirate available.
  
 
=Ressources=
 
=Ressources=
 
* http://dangerousprototypes.com/docs/Bus_Pirate_I/O_Pin_Descriptions
 
* http://dangerousprototypes.com/docs/Bus_Pirate_I/O_Pin_Descriptions
 +
* http://dangerousprototypes.com/docs/UART
 +
* http://dangerousprototypes.com/docs/Bus_Pirate_102_tutorial
 +
* http://blog.zencoffee.org/2011/07/bus-pirate-as-ftdi-cable/
 +
* http://neophob.com/2011/12/use-buspirate-to-upload-sketch-to-arduino-ethernet/
 +
* http://forum.arduino.cc/index.php/topic,20523.0.html
 +
* http://blog.oneharding.com/programming-arduino-pro-mini-with-bus-pirate/ (this is not what we are doing here)
 +
 +
=Connecting hardware=
 +
Connect :
 +
{|
 +
 +
|}
 +
 +
=Setting up the Bus Pirate=

Revision as of 14:45, 17 January 2015

Why

I've broken my FTDI USB/TTL and need to upload a new sketch without unmounting all my prototype (SPI pins on my prototye are used). I have a Bus Pirate available.

Ressources

Connecting hardware

Connect :

Setting up the Bus Pirate